- UniMachines
- ›
- CNC Milling Machines and Machining Centers
- ›
- CNC Vertical Machining Centers
- ›
- CNC Vertical Machining Centers DECKEL MAHO
- ›
- CNC Vertical Machining Centers DECKEL MAHO DMC 63 V
CNC Vertical Machining Center DECKEL MAHO DMC 63 V
| Category | CNC Milling Machines and Machining Centers DECKEL MAHO › |
| Manufacturer | DECKEL MAHO › |
ARCHIVED AD
CNC Vertical Machining Center DECKEL MAHO DMC 63 V was manufactured by the machine manufacturer DECKEL MAHO. Machine DECKEL MAHO DMC 63 V was built in 1998 year.
General data | |
|---|---|
| Location | Italy |
| region | Pavia |
| Year of manufacture | 1998 |
| Warranty | Without warranty |
| Technical condition | Good |
Technical parameters | |
|---|---|
| Length of the working table | 800 mm |
| Width of the working table | 500 mm |
| Maximum table load (evenly distributed) | 500 kg |
| Power of the spindle drive | 13 kW |
| Number of CNC controlled axles | 3 pcs |
| Number of synchronous axles | 3 pcs |
| Number of tools in the magazine | 24 pcs |
| Maximum rotary speed of the vertical spindle | 8000 1/min |
| Travel length X-axis (mechanical feed) | 630 mm |
| Travel length Y-axis (mechanical feed) | 500 mm |
| Travel length Z-axis (mechanical feed) | 500 mm |
| Maximum feed rate in X-axis | 500 mm/s |
| Maximum feed rate in Y-axis | 500 mm/s |
| Maximum feed rate in Z-axis | 500 mm/s |
| Machine height | 2700 mm |
| Machine length | 3500 mm |
| Machine width | 3000 mm |
| Machine weight | 5.2 t |
Equipment | |
|---|---|
| Deckel Maho DMC 63 V | |
