- UniMachines
- ›
- Hydraulic Presses
- ›
- H Frame Hydraulic Presses
- ›
- H Frame Hydraulic Presses OMERA
- ›
- H Frame Hydraulic Presses OMERA OPI 250
H Frame Hydraulic Press OMERA OPI 250
H Frame Hydraulic Press OMERA OPI 250 was manufactured by the machine manufacturer OMERA. Machine OMERA OPI 250 was built in 2000 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 2000 |
| Warranty | Without warranty |
| Technical condition | Unused |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 250 t |
| Length of the working table | 1200 mm |
| Width of the working table | 1100 mm |
| Maximum stroke of the piston rod | 800 mm |
| Speed of the piston rod (without load) | 700 mm/s |
| Speed of the piston rod (pressing) | 62 mm/s |
| Speed of the piston rod (return) | 540 mm/s |
| Maximum force of the ejector (pressing) | 3 t |
| Maximum stroke of the ejector | 300 mm |
| Maximum pressure | 27.5 MPa |
| Oil tank capacity | 1300 l |
| Machine height | 5515 mm |
| Machine length | 2230 mm |
| Machine width | 2780 mm |
| Machine weight | 24 t |
Equipment | |
|---|---|
| Hydraulic ejector | |
