- UniMachines
- ›
- Drilling Machines
- ›
- Jig borers
- ›
- Jig borers STANKOIMPORT
- ›
- Jig borers STANKOIMPORT 2B440 A
Jig borer STANKOIMPORT 2B440 A
Jig borer STANKOIMPORT 2B440 A was manufactured by the machine manufacturer STANKOIMPORT. Machine STANKOIMPORT 2B440 A was built in 1969 year.
General data | |
|---|---|
| Location | Poland |
| region | Mazowieckie |
| Year of manufacture | 1969 |
| Warranty | Without warranty |
| Technical condition | Good |
| Loading | The buyer organizes the loading at his own cost |
| Payment | At receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum drilling diameter in steel | 25 mm |
| Maximum boring diameter | 250 mm |
| Length of the working table | 800 mm |
| Width of the working table | 400 mm |
| Throat depth (distance of the spindle axis from the frame) | 500 mm |
| Maximum distance from the spindle to the table | 585 mm |
| Maximum table load (evenly distributed) | 320 kg |
| Travel length X-axis (mechanical feed) | 710 mm |
| Travel length Y-axis (mechanical feed) | 400 mm |
| Travel length Z-axis (mechanical feed) | 270 mm |
| Maximum feed rate in X-axis | 13.3 mm/s |
| Accuracy of positioning | 0.001 mm |
| Machine height | 2385 mm |
| Machine length | 2520 mm |
| Machine width | 2195 mm |
| Machine weight | 3.4 t |
Equipment | |
|---|---|
| Automatic travel of the quill | |
| Automatic travel of the headstock | |
| Rapid feed of the headstock | |
| The working table enables feed in the X and Y axis | |
| Rapid feed of the table | |
| Boring head | |
| C-frame type | |
| Central lubrication | |
| Liquid cooling system | |
| Lighting | |
| Technical documentation | |
